Top-rated independent appliance repair across the Southwest
Stove & Range Repair in Aurora — Book a Visit Today
We repair cooktops and ranges in Aurora and nearby Commerce City, all major brands, no brand affiliation. A burner that clicks with no flame, or an electric coil staying cold on one side, usually traces to an igniter, a switch, or a bad connection under the cooktop. Some of it is simple. Gas work we handle carefully, and if you smell gas, shut the valve and step outside first. Tell us which burner fails and when. Call us or send the quote form and we will get a visit set up.
Call (888) 352-5066- A real person answers
- Open 7 days
- Written quote before work starts
Taking calls until 5:00 PM MST
Common stove & range faults in Aurora homes
- Burner clicks and clicks but won't light Wet or clogged igniter, cracked spark electrode, or a fouled burner cap
- Oven says preheated but food comes out raw Drifting temperature sensor, weak bake element, or a control board reading wrong
- One glass cooktop zone stays cold Failed radiant element, burned infinite switch, or a broken element connection
- Gas flame is yellow and lazy Air shutter, port blockage, or a regulator and gas supply issue
- Oven door won't unlock after self-clean Stuck door latch motor, thermal cutoff trip, or a control lockout fault
Aurora coverage
We work across 80011, 80013, 80015, and 80016, and we cross into Glendale, Commerce City, Cherry Creek, and Denver when the route lines up.
Other repairs we do in Aurora
- Refrigerator Repair
- Washer Repair
- Dryer Repair
- Dryer Vent Cleaning & Repair
- Dishwasher Repair
- Oven Repair
Stove & Range Repair in cities near Aurora
Stove & Range Repair service hub → · Every appliance we fix in Aurora →
How an independent local shop compares in Aurora
| Surprise Appliance Repair | Big-box repair chains | Handyman listings | |
|---|---|---|---|
| Quote in writing before a wrench comes out | ✓ | ✕ | ✕ |
| A real person answers, 7 days a week | ✓ | ✕ | ✓ |
| Gas and electric, all major brands | ✓ | ✓ | ✕ |
| No manufacturer targets to hit | ✓ | ✕ | ✓ |
| Techs who know the local housing | ✓ | ✕ | ✓ |
What homeowners say after the visit
“Washer walked across the floor on spin for a year. Turns out one shock absorber. Wish I had called sooner.”
Beth L.Victorville, CA“Showed up in the window they promised, wore boot covers, cleaned up the lint mess. Small things, but they add up.”
Omar F.Berkeley, CA“The tech ruled out the expensive part first instead of starting with it. That earned my trust.”
Kate V.Arvada, COStove & Range Repair in Aurora — quick answers
My oven bakes unevenly. Is that a repair or my pans?
Could be either. Dark pans and crowded racks skew results. But a sensor reading a few degrees off, or a bake element burning weak in one section, gives you steady one-sided browning. We test actual cavity temperature against the setting.
Do you work on both gas and electric ranges?
Yes. Gas ranges bring igniters, valves, and regulators. Electric ranges bring elements, switches, and heavy wiring at the terminal block. Induction adds its own boards and sensors. Tell us which type you have when you call us.
Is a clicking igniter dangerous?
Persistent clicking with no flame means gas may be releasing without lighting. Turn the knob off, let the air clear, and don't use that burner. If you smell gas at all, leave and call your gas utility first.
Should I run self-clean before you come out?
We'd skip it. Self-clean runs extreme heat and often takes out door latches, thermal fuses, and control boards on older ranges. Scrape the cavity by hand instead and let us look at the existing problem first.
How soon can someone get out to my Aurora house?
Most calls get a same-week window, and often sooner if you're near a route we're already running that day. Morning and afternoon blocks are both available. Tell us your ZIP when you call us and we'll say what's open.
How it works
- Step 1
Tell us the symptom
Call us or fill in the form and describe what you hear, smell, or see. Water on the floor. A clicking compressor, a burning odor. Small details narrow the cause before anyone drives out.
- Step 2
We schedule the visit
You pick a window that fits your day, and we confirm the make and model so common parts ride along in the van. Tell us if the unit sits in the garage or on the patio. Heat changes what we check first.
- Step 3
Diagnose and repair
Our technician tests the unit, explains what failed, and lays out your options in plain words. Most repairs finish that same visit. If a part has to be ordered, you'll know before we leave.
- A real person answers
- Open 7 days
- Written quote before work starts
Why homeowners call us
- Built for desert heatSummer here punishes appliances. Compressors run long, coils choke on fine dust, and garage refrigerators fight ambient air near 115 degrees. We look for heat-driven failures first, because that's usually where the trouble started.
- Any major brandWe work as an independent company on all major residential brands: refrigerators, washers, dryers, dishwashers, ranges, ovens, and freezers. One crew handles both the kitchen and the laundry room, so you aren't juggling separate calls.
- Straight explanationsYou hear what part failed and why, without a wall of jargon. If a repair doesn't make sense on an aging unit, we say that too. Then you're deciding with real information instead of guesswork.
- Six-state coverageFrom Surprise out across the Southwest, our service area covers six states. The approach doesn't change from town to town: careful diagnosis, a tidy work area, and a clear plan before we start pulling anything apart.
- All major brands, gas & electricEvery major appliance brand, gas and electric, handled by an independent shop.
- Straight answersIf it isn't worth repairing, we'll say so, often right on the phone.
Stove & Range Repair in Aurora
Each broken day has a price tag
Fault described, quote approved, repair done. The first step takes a minute.
- A real person answers
- Open 7 days
- Written quotes
- All major brands
- Gas & electric
Rather not call? Get a free quote →